0	{VO Id}
1	{Number of layers, 1-single layer coding, 2-temporally,Spatial scalable coding}
2       {MPEG-4 Version identifier : 1-Version1 , 2:Version2}
0	{VOL Id}
4	{VOL Type indication 1-Simple, 2-Simple Scalable, 3-Core, 4-Main, etc.}
25.0	{VOL frame rate (Hz)}
3	{Value of M Abstand zwischen P Frames => ein B Frame}
176	{Hor. size of Y image on disk}
144	{Ver. size of Y image on disk}
25.0000 {Frame rate of source sequences on disk (Hz)}
1	{Type of alpha channel 0-RECTANGULAR, 1-BINARY, 2-GREY LEVEL 3-BINARY ONLY }
0	{MAC enable}
1	{OBMC disable: 1-disable, 0 -enable}
5	{quantizer precision}
8	{bits per pixel}
/tmp/FITZEK/film.yuv {Name of source VOP Y file on disk}
/tmp/FITZEK/film.yuv {Name of source VOP U file on disk}
/tmp/FITZEK/film.yuv {Name of source VOP V file on disk}
/tmp/FITZEK/film.yuv {Name of source VOP Binary-Alpha file on disk}
1	{Write the coded VOPs to disk, 0 - no write, 1 - write}
/dev/null   {Name of output VOP Y file}
/dev/null   {Name of output VOP U file}
/dev/null   {Name of output VOP V file}
/dev/null   {Name of output VOP Binary-Alpha file}
/tmp/FITZEK/mp4-01.bits {Name of bitstream file for this VOL}
1	{VOL start frame}  
960    	{VOL end frame}
0	{Time (ms) at which VOL first appears}
40000	{Target bit-rate for VOL}
1.|1.|1.  {Global RC Parameters: I|P|B for UPM1, position|max_dist for UPM2 }
0	{Alpha threshold.}
1 	{change_CR_disable}
0	{VOL quant. type select: 0 - H.263 quant, 1 - MPEG2 quant.}
0	{VOL load_intra_quant_mat: 0-no, 1-userdefined, 2-MPEG4 VM7, 3-MPEG2 Default, 4-MPEG2 TM5} 
intra_quant_mat		{user defined intra matrix) 
0	{VOL load_nonintra_quant_mat: 0-no, 1-userdefined, 2-MPEG4 VM7, 3-MPEG2 Default, 4-MPEG2 TM5}
non_intra_quant_mat	{user defined non_intra matrix)
0	{VOL load_gray_intra_quant_mat: 0-no, 1-userdefined, 2-MPEG4 VM7, 3-MPEG2 Default, 4-MPEG2 TM5}
gray_intra_quant_mat	{user defined gray intra matrix)
0	{VOL load_gray_nonintra_quant_mat: 0-no, 1-userdefined, 2-MPEG4 VM7, 3-MPEG2 Default, 4-MPEG2 TM5}
gray_non_intra_quant_mat	{user defined gray non intra matrix)
4	{Initial value for quantizer - INTRA höherer Wert entspricht geringer Qualität}
4	{Initial value for quantizer - P_VOPs}
4	{Initial value for quantizer - B_VOPs}
4	{Gray level alpha map quantizer - INTRA}
4	{Gray level alpha map quantizer - P_VOPs}
4	{Gray level alpha map quantizer - B_VOPs}
0       {Gray level alpha map quantizer update flag}
0	{Flag to disable rounding control: 0 - enabled, 1 - disabled}
0	{Initial value for rounding control: 0/1}
0	{Flag to disable error resilience: 0 - enabled, 1 - disabled}
0	{Flag to enable the use of data partitioning mode: 0 - disabled}
0	{Flag for reversible VLCs 1-REVERSIBLE_VLC}
300	{approximate size of resync packet in bits}
12	{for error resilient mode, specifies the period in frame for INTRA shape.} 
0	{Flag to NEWPRED mode: 1 - enable, 0 - disabled (only Version Identifier = Version2)}
0	{Reduced Resolution VOP enable: 0-disabled, 1-enabled}
0	{Reduced Resolution VOP switching mode: 0-no switching, 1-VM switching, negative value-fixed interval switching}
0	{intra_dc_vlc_thr: 0-7, see N2202, Clause 7.3.1.4}
1	{SADCT disable: 1-disabled, 0-enabled}
0       {Quarter-pel MC enable: 1-enabled, 0-disabled}
16	{Search range per coded frame}
0	{Flag to indicate scalable coding: 0 - base layer,1 - enhancement layer}
1	{Flag to indicate scalability types:0 - temporal, 1 - spatial, 2-both}
0       {Spatial scalability enhancement layer type: 0 - PBB.., 1 - PPP..}
0	{Ref. layer Id in the case of scalability}
1	{Ref. layer sampling direction: 0 - same or lower res., 1 - higher res.}
1	{Hor. sampling factor - n}
2	{Hor. sampling factor - m}
3	{Ver. sampling factor - n}
4	{Ver. sampling factor - m}
0	{Enhancement type: 0 - whole frame, 1 - partial region}
0       {Usage Ref. Shape: 0 - no, 1 - yes}
0       {Usage Ref. Texture: 0 - no, 1 - yes}
1       {Shape hor. sampling factor - n}
1       {Shape hor. sampling factor - m}
1       {Shape ver. sampling factor - n}
1       {Shape ver. sampling factor - m}
12	{INTRA PERIOD Abstand der I Frames}
0       {Group of VOPs PERIOD: 0-no GOV, >0 -one GOV every PERIOD} 
0      	{1=Interlaced, 0=Progressive}
0	{1 if top line is part of first field, else 0}
0	{1 to use vertical alternate scan for all interlaced blocks}
0	{Direct mode search radius (half pels)}
0	{MV file usage: 0-don't use; 1-read; 2-write}
mvfile.dat {Motion vector file name}
0	{Is user data in VOL?}
ud_vol_enc.dat	{File for user data in VOL}
0	{Is user data in GOV?}
ud_gov_enc.dat	{File for user data in GOV}
1	{complexity_estimation_disable}
complexity_estimation.data	{Complexity Estimation data file}
0	{VOL control Parameters enable } 
0	{VBV Parameters enable (if VOL control parameters enabled)} 
1|1|1	{VBV Parameters: bitrate|vbv_buffer_size|vbv_occupancy }
0	{SPRITE USAGE (0:no, 1:static, 2:GMC)}
1	{Number of Sprite Points}
2	{Warping accuracy (0 -- 1/2, 1 -- 1/4, 2 -- 1/8, 3 -- 1/16)}
0	{lighting_change_in_sprite is FALSE}